AboutContactContact Hy-Treat
Plant Sizing
Start with flow. Finish with engineering. Estimate daily wastewater flow, apply an operating margin, and see the closest preliminary Hy-Series model.
Estimate your preliminary design flow.
Choose the closest facility type, enter its expected occupancy, then select a load profile. All allowances and Hy-Series capacities shown here are provisional pending Hy-Treat’s final technical approval.
Flow is the beginning—not the complete design.
Hydraulic load
Average flow, peak use, occupancy pattern, seasonal variation, and future growth.
Organic load
The pollution strength reaching the plant, including higher-strength commercial wastewater.
Site constraints
Excavation, access, groundwater, ventilation, levels, electrical supply, and service clearance.
Required outcome
Discharge destination, reuse objective, polishing, disinfection, and applicable requirements.
The better the input, the better the first recommendation.
Send the project location, facility use, expected occupancy, operating schedule, site dimensions, drawings if available, photographs, and the intended discharge or reuse route.
For an existing system, also include the current capacity, observed problems, emptying frequency, odor or discharge symptoms, and any available water-analysis results.
A preliminary number needs a real site review.
Send the calculated result with your project details and Hy-Treat will check the correct treatment route.